iShoot Sniper Camera Shutter Release Remote Control/Flash Wireless Radio Trigger—500m 2.4GHz 16 Channels Hot Shoe Cold Foot PC Sync

iShoot Sniper Camera Shutter Release Remote Control/Flash Wireless Radio Trigger—500m 2.4GHz 16 Channels Hot Shoe Cold Foot PC Sync
Product Code: 2*IS-SNP
Reward Points: 7
Availability: In Stock
Price: $74.99
Price in reward points: 150
Qty:     - OR -   Add to Wish List
Add to Compare

Camera Remote Control/Wireless Flash Trigger Set--- Shooting 500m as a Sniper

International Buyers - Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges.
Buyers should be responsible for those charges.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

2 * Wireless Radio Trigger
2 * Hot Shoe Cover
2 * Flash Base
2 * Velvet Protection Bag
2 * Lanyard

Applicable to:
Nikon D4/D3X/D3S/D3/D700, D300S/D300, D2X/D2H/D200, D1X/D1H/D100,
D7000/D5000/D3100/D3000, D90/D80/D70/D60/D50/D40
Canon 1Ds/1D series, 5D Mark III/5D Mark II/5D, 7D/60D/50D/40D/30D/20D/10D,
Nikon SB910/SB900/SB800/SB700/SB600
Canon 600EX-RT/580EXII/580EX/430EXII/430EX/270EX/220EX

1. Long operation range, very low miss rate, multi-function all in one
1) Operation distance can be up to 500 metres in an open area with no obvious obstacles and no interferences;
2) Average hit rate can be over 90% within operation distance.
3) Max SYNC speed can reach 1/500 seconds -- depending on your camera, Nikon D70, D40 can achieve it;
4) The product is compatible with many flashguns including all major Canon, Nikon flash in non-TTL mode wirelessly as well as many different studio lights.
5) The product is a must have gadget for creative shootings with ability of controlling up to 3 groups of flashguns wirelessly. When the device is set to flash mode, remote control flashguns in group A/B/C separately. When device is set to camera mode, group switch A/B/C will work as camera T/B/N switch.
6) The product can also act as a wireless shutter remote control and support camera auto focus function. When in shutter control modes you can do 4 seconds delay shooting, bulb shooting and continuous shooting.
7) Each individual device can act as a transmitter or a receiver by setting and designed in a perfect and classic way.
8) When in flash mode and in TX status, can active flashgun in sleeping mode wirelessly (in applicable range) by fully pressing button; when in camera mode and in TX status, can activate camera auto focus function by pressing button halfway, and can take a picture by fully pressing.
9) Signal from camera hot shoe will go straight through to the device hot shoe. When the device is mounted on camera hot shoe, if there’s a flashgun also mounted on the device hot shoe, it will be fired as well as other flashgun connected wirelessly.
10) PC SYNC socket and 2.5mm shutter control socket provide more expanding functions.
2. Operates on 2.4Ghz frequency band – operates on ISM frequency band and can achieve accurate and continuous communication with encryption and decryption technology.
3. Anti-interference with 16-channel switch – it comes with 16 individual channels which can help eliminating signal interference and can improve reliability greatly.
4. Acknowledgement indicator to display failure/success signals – Dual LED to clearly indicate operation status of receiving and sending signals.
5. Built in voltage detection circuit – smart power management
6. Support rechargeable batteries - it’s compatible with AA alkaline batteries as well as Ni-Cd, Ni-MH, Li-ion and other rechargeable batteries.
7. Dustproof and waterproof design – In order to achieve a longer operation life, some key components are protected by double dustproof and waterproof layer.

Radio Band: 2.4GHz ISM band
Channels: 16
Power: <10dBm
Operation Distance: up to 500 meters
Flash Grouping: 3 x groups (A/B/C)
Sync Speed: ≥1/500 sec (Depending on Cameras)
Batteries: 2 x AA (Alkaline, Ni-Cd, Ni-MH, Li-ion)
Battery life: >= 300 HRs in transmitter mode
                  >= 50 HRs in receiver mode
Shutter Control Socket: 2.5mm socket
              Support 4 seconds delay shooting, bulb shooting and continuous shooting
PC SYNC Socket: ISO518 standard sync socket
Antenna: 50ohm SMA socket
Hot Shoe Contacts: compatible with ISO518, use ESD protection (IEC61000-4-2 Level 4 Standard)
Dimensions: 95×70×45mm
Net Weight: 120g
Working Temperature: -15 ~+50℃(test in lab)


Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: