SHINING Mini Portable LCD DC Strobe Compatible with Canon Nikon Pentax/Samsung Olympus Panasonic
|
SHINING Mini Portable LCD DC Strobe Compatible with Canon Nikon Pentax/Samsung Olympus Panasonic
| Description |
1. Small and light – The strobe has a diameter of only 95mm, a length of 200mm and a total volume that is smaller than a 1.25L Pepsi Cola bottle. Weighing at only 860g it is light and easy to transport. The battery’s height of 125mm is no larger than a can of a 330ml coke can and with a weight of only 800g.
2. A complete set of functions – The strobe has a complete set of functions (see table 1) and provides a user-friendly design.
3. Wide use of application and easy to use – the strobe’s highest index is 54GN which can be easily applied in professional portrait photography. Its lowest index is only 6GN and can be applied in macro photography (a precision of 1/3 digit and 18 levels of smooth adjustment). It can be widely used in various occasions. It can be trigged by light or work as a slave lighting. The highest flash speed up to 1/2000s - see Table 2
4. Solid and durable and has a luxurious configuration - The DC strobe uses power saving white LCD panel which clearly displays battery level, recycling speed, light output level, stroboscopic frequency, sound indicator and in use status, etc. The body of the strobe is coated with black paint, high standard silk-screened, and comes with an all-aluminum case. It is configured with a removable ABS hand grip which has a screw thread to extend its use. The original battery is made from 3300mA solid Ni-Mh and has a maintenance free design and also has an over-discharging protection. Besides that, it also comes with a professional camera bag, a multifunctional holder, a dedicated strap, a 1 meter long trigger and a charger with wide input voltage range. |
| Specifications |
Volume of the strobe: 95mm(diameter) ×200 mm(length)
Weight of the strobe: about 860g
Volume of the battery: 125mm(height) ×85mm(width) ×50 mm(thickness)
Weight of the battery: about 800g
Capacity of the battery: 3300mA
Material of the battery: Ni-Mh
Flash power: 200W
Flash index: GN54
Flash color temperature: 5500K
Display mode: LCD digital mode
Flash frequency:
1:1 output——about 500 times (tested with fully charged battery)
64:1 output——about 10000 times (tested with fully charged battery)
Flash's recycling Time:
1：1--3S (tested with fully charged battery)
64:1--0.3S (tested with fully charged battery)
Stand by time: about 100H
Charging time: about 4H
Charging voltage: 100-240V/50-60Hz |
| How to Use |
1. Switch the power on and plug in the strobe's power cable to the socket, you should hear a "beep" once they are connected, and as soon as the strobe's LCD is on it means the strobe's power is also on.
2. Press 'MODE' button to select a function. In 'Manual' mode by tuning the stepping potentiometer, you can control how much light to output according to the environment - see attached table for more details. By doing this you can achieve 1/3 digit precision adjustment and 18 level smooth adjustment.
3. In 'QUCK CONT' mode, by tuning the stepping potentiometer, you can control the flash frequency according to your needs. You can choose 5 times/second or 15 times/second and light amount index is GN20.
4. In 'QUCK MULTI' mode, , by tuning the stepping potentiometer, you can control how much light to output under 3 times/second status. You can choose from 1/64、1/32 and 1/16 three different light output level.
5. In 'SLOW' mode there are 7 levels of light output. You can achieve light output between 1/1 and 1/64 in this mode and you can also trigger (light control) the same model DC strobes which are set as "SLAVE". In the mean time, it won't interfere with other cameras' built-in TTL speedlites and be able to synchronize with your camera's shutter.
6. If you need to shut down the beep indicator, just by tuning the stepping potentiometer while the "MODE" button is set to non-flash mode. (Note: Please check the power status indicator when the DC strobe is not working. If the red light is always on or the recycling indicator is flashing please charge it right away. The charger features a wide input voltage range design and intelligent voltage switch - the red light will be on during charging and it will turned to green when fully charged. In general a full charging will take about 3-4 hours.) |
| Function |
Table 1
MODE：（Function）
Operation
Function |
Switch |
Switch |
|
|
|
|
|
Remark |
BUZZ
（On/Off） |
On |
Off |
|
|
|
|
|
Switch freely |
MANUAL |
1/1 |
1/2 |
1/4 |
1/8 |
1/16 |
1/32 |
1/64 |
1/3 gear |
QUICK CONT |
5/Sec |
15/2 Sec |
|
|
|
|
|
GN20 |
QUICK MUTLI |
1/16 |
1/32 |
1/64 |
|
|
|
|
3/Sec |
SLOW
( Optically Controlled) |
1/1 |
1/2 |
1/4 |
1/8 |
1/16 |
1/32 |
1/64 |
Slave |
Table 2
Exposure Index：（ISO100：1m）
Output Ratio |
1/1 |
1/2 |
1/4 |
1/8 |
1/16 |
1/32 |
1/64 |
GN
F Value |
54 |
40 |
28 |
20 |
14 |
9 |
6 |
2.8 |
20m |
14m |
10m |
7m |
5m |
3.5m |
2.5m |
4 |
14m |
10m |
7m |
5m |
3.5m |
2.5m |
1.7m |
5.6 |
10m |
7m |
5m |
3.5m |
2.5m |
1.7m |
1.2m |
8 |
7m |
5m |
3.5m |
2.5m |
1.7m |
1.2m |
0.8m |
11 |
5m |
3.5 |
2.5m |
1.7m |
1.2m |
0.8m |
0.6m |
16 |
3.5m |
2.5m |
1.7m |
1.2m |
0.8m |
0.5m |
0.3m |
|
| Package Including |
DC Strobe×1
Strobe Cover×1
Strobe Cap×1
Strobe Bulb×1
Ni-Mh Battery×1
Battery Charger×1
Strobe Holder×1
Strap×1
Trigger×1
Camera Bag×1
|
|
|
All required fields are marked with a star (*). Click the 'Add To Cart' or 'Add To Wish List' button at the bottom of this form to proceed.
Related Items
